Page 1 of 1
Bug Pos 6.08
Posted: Sun Jul 04, 2004 1:18 am
by Robert_Nel
Hi Dale ,
I am using a reciept printer Citezin CBM 253 .
When printing reports the paper cutter does not work.
Using Pos 6.08.
Thanks
Robert Nel
Posted: Sun Jul 04, 2004 6:59 am
by Andrew
Robert, you need to supply such info as how the printer is connected to the computer, are you using APRINT, etc...
Works here
Posted: Sun Jul 04, 2004 11:38 am
by Dale Harris
Robert_Nel,
I tried it here and it worked fine. Try this, set your cutter code to 65,66,67,68,69,70. Now go print a report. At the end of the report ABCDEF should be printed although the cutter bar will not work. Those letters use the ASCII codes 65,66,67,68,69,70. So if you see ABCDEF printed at the end of a report then the cutter bar code is being sent. Now go back and reset the cutter code back to the proper values and try printing a report again. Does the cutter code work? Did you see ABCDEF during the test?
same problem
Posted: Mon Jul 12, 2004 11:50 am
by Graeme Gove
I have exactly the same problem with an epson parallel printer. Cuts fine after transactions but won't cut paper after doing a report.
Posted: Mon Jul 12, 2004 5:10 pm
by peewee3ie
Hi Dale
I have the same problem with a Epson Thermal printer that connects throuth the serial port (com 1).
ABCDEF
Posted: Mon Jul 12, 2004 5:38 pm
by Dale Harris
What happens when you try the ABCDEF thing?